These are instructions to flash stock rom using smart phone tools on a computer
Tools needed:-MTK USB VCOM Driver, ADB Driver.
-Stock Rom for your MediaTek Device.
-Smart Phone Flash Tool. Click here for Sp flash tool
Tools needed:-MTK USB VCOM Driver, ADB Driver.
-Stock Rom for your MediaTek Device.
-Smart Phone Flash Tool. Click here for Sp flash tool
Note:- MTK USB VCOM or ADB Driver must be installed before,
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver & Firmware
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4:Run Flash_Tool.exe as administrator.
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver & Firmware
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4:Run Flash_Tool.exe as administrator.
Step 5:load the Download agent from the sp flash tool folder.
Step 6: load the Scatter File from the firmware folder.
Step 7: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 8: Connect your Smartphone (off mood) to the computer using the USB Driver.Than started flashing.
Step 9: Sit beside and wait for Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
